 |
|
| |
Dual-Flow BioAerosol Sampler for Laboratory
BioAerosol Air Sampler (BAS) is a high performance air sampler, based on the principle of Andersen impact method.
Flow rate 100L/min
Long battery life ≥10 hours(100L/min)
Data Storage 20,000 sets
Remote sampling 8 m
Product Features
4.3’’ capacitive touchscreen,rapid response
All components and circuits interfaces are isolated from the external environment ro prevent oxidant intrusion
Long Battery Life
100L/min≥10hours (60m³）
200L/min≥4hours (48m³）
Flow Accuracy
±2.5%（100L/min）
±3% (200L/min）
Compliance with FDA21 CFR Part 11
Remote Sampling
Powerful and stabilized pump to support Remote/Isolator sampling(up to 8m)
*The remote/isolator sampling can only support the flow rate of 100L/min*
Operation Interface
Data
- Intuitive sampling records
- Search function for quick search of records - One-click for exporting and printing
Sampling
- Intelligent sampling mode enables continuous and cyclic sampling
-The sampling process is clear and distinct
LED lighting and beep prompt error
Setup
- Smart Settings mode
- User-friendly input method
Do not use the device near ethyl alcohol, paint thinners or any other inflammable materials. If inflammable materials come into contact with electrical components inside the devices, it could be a fire hazard.
Do not place any containers with water or liquid on the device. Shut down the device immediately when any liquid falls into or splashes into the device. In addition, if the power cord or any cables are connected, disconnect immediately. Unplug the power code entirely.
Do not place the device on an unstable location such as an unstable platform or sloped surface). Do not place the device where is vulnerable to severe vibration. Any of these conditions can result in damage to the device or personal injury for those nearby.
Do not place the device in the following location, or it could be a fire hazard.
﹒Locations susceptible to high temperatures.
﹒Close to any open flame.
Dual-Flow BioAerosol Sampler for Laboratory
BioAerosol Air Sampler (BAS) is a high performance air sampler, based on the principle of Andersen impact method.
Flow rate 100L/min
Long battery life ≥10 hours(100L/min)
Data Storage 20,000 sets
Remote sampling 8 m
Product Features
4.3’’ capacitive touchscreen,rapid response
All components and circuits interfaces are isolated from the external environment ro prevent oxidant intrusion
Long Battery Life
100L/min≥10hours (60m³）
200L/min≥4hours (48m³）
Flow Accuracy
±2.5%（100L/min）
±3% (200L/min）
Compliance with FDA21 CFR Part 11
Remote Sampling
Powerful and stabilized pump to support Remote/Isolator sampling(up to 8m)
*The remote/isolator sampling can only support the flow rate of 100L/min*
Operation Interface
Data
- Intuitive sampling records
- Search function for quick search of records - One-click for exporting and printing
Sampling
- Intelligent sampling mode enables continuous and cyclic sampling
-The sampling process is clear and distinct
LED lighting and beep prompt error
Setup
- Smart Settings mode
- User-friendly input method
Do not use the device near ethyl alcohol, paint thinners or any other inflammable materials. If inflammable materials come into contact with electrical components inside the devices, it could be a fire hazard.
Do not place any containers with water or liquid on the device. Shut down the device immediately when any liquid falls into or splashes into the device. In addition, if the power cord or any cables are connected, disconnect immediately. Unplug the power code entirely.
Do not place the device on an unstable location such as an unstable platform or sloped surface). Do not place the device where is vulnerable to severe vibration. Any of these conditions can result in damage to the device or personal injury for those nearby.
Do not place the device in the following location, or it could be a fire hazard.
﹒Locations susceptible to high temperatures.
﹒Close to any open flame.
